Results 1 to 2 of 2

Thread: Landrover series 3 brake problem

  1. #1
    Join Date
    Mar 2016
    Location
    SA
    Posts
    1

    Landrover series 3 brake problem

    hi can any one help me? i seem to have a problem with my landrover series 3 brakes. i did n pressure bleeding on it but stil after all that u get a hard pedal but as soon as j leave it for 5 seconds, that brakes is gone and the pedal hits the floor!! does any know how to fix this problm please!!

    Sent from my SM-N910F using Tapatalk

  2. #2
    Join Date
    Oct 2006
    Location
    Oak Park, CA
    Posts
    2,207
    Welcome, you should introduce yourself...
    My series has some sort of compensation valve for the brakes (front/rear) not sure what the procedure is, but I remember if you don't do it right, you can get something like what you are describing... but most likely you have a leak somewhere or you have very old and spongy lines...
    <DCProven >
    <1977 Land Rover Santana, Series III, 2.25 Diesel>
    <1995 RRC, LWB, 4.2 V8>

    "Information is not knowledge,..." Frank Zappa

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •